地震学报（英文版）2003，Vol.16Issue(1)：107-112,6.
Analysis on effect of surface fault to site ground motion using finite element method
Analysis on effect of surface fault to site ground motion using finite element method
曹炳政 1罗奇峰1
作者信息
- 1. Research Institute of Structural Engineering and Disaster Reduction, Tongji University, Shanghai 200092, China
- 折叠
摘要
Abstract
Dynamic contact theory is applied to simulate the sliding of surface fault. Finite element method is used to analyze the effect of surface fault to site ground motions. Calculated results indicate that amplification effect is obvious in the area near surface fault, especially on the site that is in the downside fault. The results show that the effect of surface fault should be considered when important structure is constructed in the site with surface fault.关键词
fault/ground motion/dynamic contact/finite element methodKey words
fault/ground motion/dynamic contact/finite element method分类
天文与地球科学引用本文复制引用
曹炳政,罗奇峰..Analysis on effect of surface fault to site ground motion using finite element method[J].地震学报（英文版）,2003,16(1):107-112,6.
