| 注册
首页|期刊导航|中南民族大学学报(自然科学版)|后处理对聚丙烯中空纤维膜性能的影响

后处理对聚丙烯中空纤维膜性能的影响

王建黎 李瓯 徐又一

中南民族大学学报(自然科学版)2003,Vol.22Issue(3):1-5,5.
中南民族大学学报(自然科学版)2003,Vol.22Issue(3):1-5,5.

后处理对聚丙烯中空纤维膜性能的影响

Effect of Post-Treatment on the Properties of Polypropylene Hollow Fiber Membrane

王建黎 1李瓯 1徐又一2

作者信息

  • 1. College of Chemical Engineering and Materials, Zhejiang University of Technology
  • 2. Institute of Polymer Science, Zhejiang University
  • 折叠

摘要

Abstract

Microporous polypropylene hollow fiber membranes were prepared by the melt-spinning and cold-stretching (MSCS) method. Mechanical properties of the hollow fibers were systematically studied. It was foundthat annealing condition and drawn ratio at the cold-stretching stage greatly affected on the porosity, average pore size, surface area per volume and penetration rate of this kind of membranes. Lamella and microfibril model was used to explain the formation mechanism of micro pores in this process.

关键词

聚丙烯/多孔膜/中空纤维膜

Key words

polypropylene/mieroporous membrane/hollow fiber

分类

化学化工

引用本文复制引用

王建黎,李瓯,徐又一..后处理对聚丙烯中空纤维膜性能的影响[J].中南民族大学学报(自然科学版),2003,22(3):1-5,5.

基金项目

国家自然科学基金资助项目(59833120) (59833120)

中南民族大学学报(自然科学版)

1672-4321

访问量0
|
下载量0
段落导航相关论文