| 注册
首页|期刊导航|中国铸造|Effect of electromagnetic stirring on solidification structure of austenitic stainless steel in horizontal continuous casting

Effect of electromagnetic stirring on solidification structure of austenitic stainless steel in horizontal continuous casting

中国铸造2007,Vol.4Issue(3):198-201,4.
中国铸造2007,Vol.4Issue(3):198-201,4.

Effect of electromagnetic stirring on solidification structure of austenitic stainless steel in horizontal continuous casting

Effect of electromagnetic stirring on solidification structure of austenitic stainless steel in horizontal continuous casting

1

作者信息

  • 1. School of Metallurgy and Material Engineering, Chongqing University of science and technology, Chongqing 400050;College of Mechanical Engineering, Chongqing University, Chongqing 400044;College of Mechanical Engineering, Chongqing University, Chongqing 400044;School of Metallurgy and Material Engineering, Chongqing University of science and technology, Chongqing 400050;Steel Smelting Plant Chongqing Iron & steel Co. Ltd., Chongqing 400081, China;School of Metallurgy and Material Engineering, Chongqing University of science and technology, Chongqing 400050
  • 折叠

摘要

Abstract

An investigation on the influence of low frequency rotary electromagnetic stirring on solidification structure of austenitic stainless steel in horizontal continuous casting was experimentally conducted and carried out on an industrial trial basis. The results show that application of appropriate electromagnetic stirring parameters can obviously improve the macrostructure of austenitic stainless steel, in which both columnar and equiaxed grains can be greatly refined and shrinkage porosity or cavity zone along centerline can be remarkably decreased due to eliminating intracrystalline and enlarging equiaxed grains zone. The industrial trials verify that the electromagnetic stirring intensity of austenitic stainless steel should be higher than that of plain carbon steel. Electromagnetic stirring has somewhat affected the macrostructure of austenitic stainless steel even if the magnetic flux density of the electromagnetic stirring reaches 90 mT (amplitude reaches 141 mT ) in average at frequency f=3-4Hz, which provides a reference for the optimization of design and process parameters when applying the rotary electromagnetic stirrer

关键词

horizontal continuous casting/ austenitic stainless steel/ electromagnetic stirring/ equiaxal grain/center porosity

Key words

horizontal continuous casting/ austenitic stainless steel/ electromagnetic stirring/ equiaxal grain/center porosity

分类

矿业与冶金

引用本文复制引用

..Effect of electromagnetic stirring on solidification structure of austenitic stainless steel in horizontal continuous casting[J].中国铸造,2007,4(3):198-201,4.

中国铸造

OASCI

1672-6421

访问量4
|
下载量0
段落导航相关论文