首页|期刊导航|东华大学学报（英文版）|Analysis of Static Pressure in Area between Back Plate and Cylinder of a Carding Machine with CFD
东华大学学报（英文版）2009，Vol.26Issue(3)：242-246,5.
Analysis of Static Pressure in Area between Back Plate and Cylinder of a Carding Machine with CFD
Analysis of Static Pressure in Area between Back Plate and Cylinder of a Carding Machine with CFD
摘要
Abstract
To analyze static pressure between back plate and cylinder in an A186 carding machine, a fluid model is established. The model takes into account static pressure of airflow near back plate with the numerical simulation method of Computational Fluid Dynamics (CFD) in FLUENT software. The result of the simulation in the model shows that static pressure in this area quickly increases to its maximum then rapidly decreases to a lower fixed value from inlet to outlet along a zone between back plate and cylinder. Both rotating speeds of the cylinder and the taker-in affect static pressure from the inlet to the outlet, of which the cylinder rotating speed has more influence than that of taker-in.. Numerical simulations reveal that static pressure on surface of back plate are in good agreement with the former result of experimental analysis.关键词
A186 carding roach ine/FLUENT/Computational Fluid Dynamics (CFD) simulation/cylinder/static pressure/back plateKey words
A186 carding roach ine/FLUENT/Computational Fluid Dynamics (CFD) simulation/cylinder/static pressure/back plate分类
轻工纺织引用本文复制引用
HAN Xian-guo,SUN Peng-zi,ZHAO Ye-ping..Analysis of Static Pressure in Area between Back Plate and Cylinder of a Carding Machine with CFD[J].东华大学学报（英文版）,2009,26(3):242-246,5.基金项目
Project of Liaoning Provincial Science and Technology Department, China(No. 200322026) （No. 200322026）
