中国铸造2008，Vol.5Issue(4)：244-248,5.
Research on depositing Ni45 alloy on titanium alloy surface by electrospark deposition
Research on depositing Ni45 alloy on titanium alloy surface by electrospark deposition
You Tao 1Zhang Chunhui 1Su Guiqiao 1Yan Ping1
作者信息
- 1. Shenyang Research Institute of Foundry, Shenyang 110022, Liaoning, China
- 折叠
摘要
Abstract
Taking Ni45 bar as electrode, a strengthened layer of thickness up to 50 pm was built up on BT20 titanium alloy matrix by means of electrospark deposition. Results of phase analysis by using of X-ray diffraction confirmed that the deposition layer was composed mostly of three phases, NiTi, NiTi2layer was up to 910 HV0.05, about 2.7 times as high as that of the matrix. The hardness at the cross-section of the entire deposition layer showed a gradient distribution. The effects of capacitance and deposition time on thickness of deposition layer were also studied, and results showed that with relatively low capacity and short deposition time the deposition layer without cracks can be obtained.关键词
titanium alloy/electrospark deposition/Ni45Key words
titanium alloy/electrospark deposition/Ni45分类
矿业与冶金引用本文复制引用
You Tao,Zhang Chunhui,Su Guiqiao,Yan Ping..Research on depositing Ni45 alloy on titanium alloy surface by electrospark deposition[J].中国铸造,2008,5(4):244-248,5.
