材料科学与工程学报2000，Vol.18Issue(z1)：313-316,4.
Microstructure and Mechanical Properties of Tic/NiCrMo Cermets Produced by Liquid Sintering Technique
Microstructure and Mechanical Properties of Tic/NiCrMo Cermets Produced by Liquid Sintering Technique
摘要
Abstract
The effect of M additions on the microstructure and mechanical properties of TiC-based cermet produced by li oquid sintering method of powder metallurgy was investigated. The Mo content was varied between 0 and 0.8 wt.%, in 0.2wt.% increments. These flaws drastically decreased with increasing Mo content. As in conventionally produced materials, Mo was found preferentially on the carbide phase. Mo-rich regions due to incomplete dissolution of large Mo agglomerates were observed.关键词
molybdenum microstructure TiC/NiCrMo cermets mechanical propertiesKey words
molybdenum microstructure TiC/NiCrMo cermets mechanical properties引用本文复制引用
Yue LIU,Baohai YU,Dehui GUAN ,Jing BI..Microstructure and Mechanical Properties of Tic/NiCrMo Cermets Produced by Liquid Sintering Technique[J].材料科学与工程学报,2000,18(z1):313-316,4.基金项目
This research project was supported by the Liaoning's Natural Science Foundation. （）
