中国机械工程2001，Vol.12Issue(4)：379-382,4.
基于填充曲线刀具路径的数控铣削过程物理仿真
Dynamic Simulation of NC Milling Process Based on Space-Filling Curves
张大卫 1袁大春 1杨志永2
作者信息
- 1. 天津大学机械工程学院，天津市300072
- 折叠
摘要
Abstract
By means of the research work of references，dynamic characteristics of the space surface numeral control milling process were studied aiming at a new cutter path based on space filling curves in this paper. A new novel approach for calculating instantaneous milling thickness was developed. The effect that the new cutter path restrains the chatter of NC milling process was confirmed through digital simulation. The results show that the cross-section method can solve the instantaneous milling thickness effectively, and based on analyzing the dynamic characteristic simulation of milling process at different cutter path, the result is also proved that the Hilbert filling curves can restrain the regenerative chatter effectively.关键词
填充曲线/再生颤振/数字仿真/铣削力分类
机械制造引用本文复制引用
张大卫,袁大春,杨志永..基于填充曲线刀具路径的数控铣削过程物理仿真[J].中国机械工程,2001,12(4):379-382,4.
