北京科技大学学报2001，Vol.23Issue(1)：38-41,4.
浇注温度对AlSi7Mg合金显微组织的影响
Effect of Pouring Temperatures on the Microstructures of the Semi-Solid AlSi7Mg Alloy
毛卫民 1杨继莲 1赵爱民 1崔成林 1钟雪友1
作者信息
- 1. 北京科技大学材料科学与工程学院铸造研究院,
- 折叠
摘要
Abstract
The effect of different pouring temperatures on the microstructures of AlSi7Mg alloy has been researched. When the pouring temperature is close to the liquidus temperature of AlSi7Mg alloy, the primary α-Al in the billets of AlSi7Mg alloy solidifies into spherical or nodular grains which are small and distributed homogeneously. In order to obtain non-dendritic semi-solid billets,the appropriate pouring temperature is 615℃. The faster cooling rate,the melt flowing and larger solidification region induced by the near liquidus pouring temperature promotes the formation of spherical or nodular primary α-Al.关键词
铝合金/半固态/浇注温度/凝固分类
矿业与冶金引用本文复制引用
毛卫民,杨继莲,赵爱民,崔成林,钟雪友..浇注温度对AlSi7Mg合金显微组织的影响[J].北京科技大学学报,2001,23(1):38-41,4.
