中国铸造2004，Vol.1Issue(1)：49-52,4.
Accuracy analysis of the part made by selected laser sintering
Accuracy analysis of the part made by selected laser sintering
1
作者信息
- 1. State Key Laboratory of Plastic Simulation and Die & Mold Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, Hubei, P.R. China;State Key Laboratory of Plastic Simulation and Die & Mold Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, Hubei, P.R. China;State Key Laboratory of Plastic Simulation and Die & Mold Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, Hubei, P.R. China;State Key Laboratory of Plastic Simulation and Die & Mold Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, Hubei, P.R. China
- 折叠
摘要
Abstract
The effects of different factors, including the precision of selected laser sintering (SLS) equipment, sintering temperature, sintered thickness of individual layer and laser scanning route, on the SLS part accuracy have been analyzed and studied. Some measures are suggested in order to improve the part accuracy made by SLS.关键词
rapid prototyping/selected laser sintering/laser scanning/part accuracyKey words
rapid prototyping/selected laser sintering/laser scanning/part accuracy分类
矿业与冶金引用本文复制引用
..Accuracy analysis of the part made by selected laser sintering[J].中国铸造,2004,1(1):49-52,4.
