摘要
Abstract
Processing adjustment method of producing super fine high density satin stripped fabric in Omniplus-190 air-jet loom was discussed. According to the problems such as total warp number is larger,loom efficiency is lower and fabric surface is worse, through test and experiences, it is considered that 4 warp per reed was adopted in reed-in process, intermittent draw was adopted to ground weave and weft rib weave draw was adopted to edge weave in draft lifting plan process. In weaving process opening angle,heald frame height, shed time,back beam, stop frame,loom tension,weft insertion processing et al should be set properly,loom efficiency could be improve from 60% to 85% ,first grade percent-age before cloth repairing could reach 98%.关键词
喷气织机/缎条织物/穿筘方法/穿综方法/开口时间/上机张力/引纬工艺Key words
Air-jet Loom/Satin Stripped Fabric/Reed-in Method/Draft Lifting Plan/Shed Timing/Loom Tension/Weft Insertion Processing分类
轻工纺织
