强激光与粒子束2009，Vol.21Issue(7)：987-992,6.
传导冷却端面泵浦板条放大器波前畸变数值研究
Thermal distortion analysis for conduction cooled end-pumped slab
摘要
Abstract
The thermal distortion in the conduction cooled end-pumped zig-zag slab under different cooling conditions were analyzed by numerical simulation.The results indicate that the thermal distortion could be reduced by 3 orders of magnitude in zig-zag propagation.The inversion phenomenon of wave front was observed when different zig-zag optical paths were selected.The zig-zag optical path can eliminate the influence of the non-uniform heat dissipating capacity in length and height directions,but not in width direction.When the heat dissipating capacity in slab's width direction is non-uniform,the thermal distortion increases significantly and the propagation direction will be deviated.Therefore,when the heat dissipating capacity of the slab is non-uniform,small bounce number of zig-zag propagation is preferable to reduce the thermal distortion.关键词
板条放大器/之字型光路/热畸变/热光效应/热管理Key words
slab amplifier/zig-zag/thermal distortion/thermo-optic effect/heat management分类
信息技术与安全科学引用本文复制引用
刘亮,郭少锋,陆启生,许晓军,陈金宝,刘泽金..传导冷却端面泵浦板条放大器波前畸变数值研究[J].强激光与粒子束,2009,21(7):987-992,6.基金项目
国家高技术发展计划项目 （）
