| 注册
首页|期刊导航|地质学报(英文版)|Tectonic Fractures in Tight Gas Sandstones of the Upper Triassic Xujiahe Formation in the Western Sichuan Basin,China

Tectonic Fractures in Tight Gas Sandstones of the Upper Triassic Xujiahe Formation in the Western Sichuan Basin,China

ZENG Lianbo LI Yuegang

地质学报(英文版)2010,Vol.84Issue(5):1229-1238,10.
地质学报(英文版)2010,Vol.84Issue(5):1229-1238,10.

Tectonic Fractures in Tight Gas Sandstones of the Upper Triassic Xujiahe Formation in the Western Sichuan Basin,China

Tectonic Fractures in Tight Gas Sandstones of the Upper Triassic Xujiahe Formation in the Western Sichuan Basin,China

ZENG Lianbo 1LI Yuegang2

作者信息

  • 1. Key State Laboratory of Petroleum Resource and Prospecting,China University of Petroleum,Beijing102249,China
  • 2. Northwest Sichuan Gas Field,Southwest Oil and Gas Field Branch,PetroChina Company Limited,Jiangyou,Sichuan 621709,China
  • 折叠

摘要

Abstract

The western Sichuan Basin,which is located at the front of the Longmen Mountains in the west of Sichuan Province,China,is a foreland basin formed in the Late Triassic.The Upper Triassic Xujiahe Formation is a tight gas sandstone reservoir with low porosity and ultra-low permeability,whose gas accumulation and production are controlled by well-developed fracture zones.There are mainly three types of fractures developed in the Upper Triassic tight gas sandstones,namely tectonic fractures,diagenetic fractures and overpressure-related fractures,of which high-angle tectonic fractures are the most important.The tectonic fractures can be classified into four sets,i.e.,N-S-,NE-,E-W-and NW-striking fractures.In addition,there are a number of approximately horizontal shear fractures in some of the medium-grained sandstones and grit stones nearby the thrusts or slip layers.Tectonic fractures were mainly formed at the end of the Triassic,the end of the Cretaceous and the end of the Neogene-Early Pleistocene.The development degree of tectonic fractures was controlled by lithology,thickness,structure,stress and fluid pressure.Overpressure makes not only the rock shear strength decrease,but also the stress state change from compression to tension.Thus,tensional fractures can be formed in fold-thrust belts.Tectonic fractures are mainly developed along the NE-and N-S-striking structural belts,and are the important storage space and the principal flow channels in the tight gas sandstone.The porosity of fractures here is 28.4% of the gross reservoir porosity,and the permeability of fractures being two or three grades higher than that of the matrix pores.Four sets of high-angle tectonic fractures and horizontal shear fractures formed a good network system and controlled the distribution and production of gas in the tight sandstones.

关键词

tectonic fracture/distribution characteristics/controlling factor/Xujiahe Formation/western Sichuan Basin

Key words

tectonic fracture/distribution characteristics/controlling factor/Xujiahe Formation/western Sichuan Basin

分类

天文与地球科学

引用本文复制引用

ZENG Lianbo,LI Yuegang..Tectonic Fractures in Tight Gas Sandstones of the Upper Triassic Xujiahe Formation in the Western Sichuan Basin,China[J].地质学报(英文版),2010,84(5):1229-1238,10.

基金项目

This study is financially supported by the Foundation of State Key Laboratory of Petroleum Resource and Prospecting,China University of Petroleum,Beijing(Grant No.PRPJC2008-03,PRPDX2008-07). (Grant No.PRPJC2008-03,PRPDX2008-07)

地质学报(英文版)

OACSCD

1000-9515

访问量1
|
下载量0
段落导航相关论文