中国铸造2010，Vol.7Issue(3)：259-264,6.
Study on traveling magnetic field casting of sheet components
Study on traveling magnetic field casting of sheet components
摘要
Abstract
The distribution of a magnetic field over an inductor used for sheet castings has been investigated experimentally. With an increase in height from the surface, the magnetic field density decreases according to the exponential law. In the transverse direction, the magnetic field density is approximately uniform except near the edges. The magnetic field density is direct proportional to the number of turns multiplied by the current in amperes. Ferromagnetic material in the upper mould can enhance the magnetic field density. Under the electromagnetic force, the mould-filling process of sheet casings has been studied by physical simulation method. The difference in filling capability between gravity casting and travelling magnetic field casting has been studied. The electromagnetic force can enhance the filling process, but it also brings a problem. With an increase in the magnetic field density, the surface quality of the aluminum alloy sheet castings becomes poor. The reason is discussed.关键词
traveling magnetic field casting/magnetic field density/mould filling process/sheet castingsKey words
traveling magnetic field casting/magnetic field density/mould filling process/sheet castings分类
矿业与冶金引用本文复制引用
Su Yanqing,Xu Yanjin,Zhao Lei,Zhang Tiejun,Wu Shiping,Guo Jingjie..Study on traveling magnetic field casting of sheet components[J].中国铸造,2010,7(3):259-264,6.基金项目
The project was financially supported by NCET050350 and the Program of Excellent Team in Harbin Institute of Technology. （）
