东南大学学报（英文版）2010，Vol.26Issue(3)：431-435,5.
考虑畸变效应的梁单元刚度矩阵应用
Application of stiffness matrix of a beam element considering section distortion effect
摘要
Abstract
According to the stationary principle of potential energy and the generalized coordinate method, a stiffness matrix of a beam element considering distortion effects is derived. Using the stiffness matrix of the beam element, a finite element program for computing thin-walled box steel beams is developed. And the program can take the section distortion and warping effects into account. The influences of diaphragm spacing on the mechanical behavior of thin-walled box beams are analyzed by the program. The numerical analysis shows that setting diaphragms have the greatest influence on the distortion normal stress, while there is very little influence on the bending normal stress. Only when the distance of adjacent diaphragms decreases to a certain value, will the distortion normal stress in the thin-walled box beam obviously reduce under the distortion load. Finally, a distortion-warping coefficient γ is introduced for simplifying the calculation of the longitudinal normal stress of thin-walled box beams. When the ratio of diaphragms adjacent space L to the maximum section dimension H is less than 2, the distortion-warping coefficient γ tends to one, which means that the distortion normal stress of the thin-walled box beam tends to zero, and the effect of the section distortion can be ignored.关键词
薄壁箱梁/势能驻值/广义坐标法/畸变/翘曲/畸变翘曲影响系数Key words
thin-walled box beam/stationary principle of potential energy/generalized coordinate method/distortion/warping/distortion-warping coefficient分类
建筑与水利引用本文复制引用
李海锋,罗永峰..考虑畸变效应的梁单元刚度矩阵应用[J].东南大学学报（英文版）,2010,26(3):431-435,5.基金项目
Specialized Research Fund for the Doctoral Program of Higher Education (No.20070247002). （No.20070247002）
