铸造技术2011，Vol.32Issue(2)：239-241,3.
Ni-P/纳米金刚石复合镀层组织和性能的研究
Study on Structure and Properties of Ni-P/nano Diamond Electroless Coating
毕晓勤 1张骞1
作者信息
- 1. 河南工业大学材料科学与工程学院,河南,郑州,450007
- 折叠
摘要
Abstract
Ni-P/nano diamond electroless coating was prepared on steel material using electroless plating technology. The effect of diamond concentration and stirring speed on the microstructure and friction coefficient of composite coating were investigated. Research results show that under the same concentration, different stirring speeds have great influence on the appearance and performance of the composite coating, the friction coefficient of the composite coating reaches the minimum when the stirring speed was 200r/min, however, the friction coefficient increased when the speed was even higher. At certain stirring speed, the friction coefficient of the composite coating shows an earlier decreased and later raised state with increasing the diamond concentration, and it reaches the minimum when the diamond concentration was 10 g/L.关键词
化学复合镀/纳米金刚石/摩擦系数/微观组织分类
矿业与冶金引用本文复制引用
毕晓勤,张骞..Ni-P/纳米金刚石复合镀层组织和性能的研究[J].铸造技术,2011,32(2):239-241,3.
