首页|期刊导航|铸造技术|45钢连铸大方坯凝固过程数值模拟

45钢连铸大方坯凝固过程数值模拟OA北大核心CSTPCD

Numerical Simulation of Solidification Process for Continuous Casting Large Size Steel Square Billet Containing 0.45%C

中文摘要英文摘要

根据240mm×280mm 45钢的实际生产条件,建立基于射钉和测温的方坯凝固传热数学模型.分析了拉速、过热度、二冷强度等参数对铸坯温度和凝固坯壳厚度的影响.结果表明,拉速是主要影响因素.拉速增大0.1m/min,铸坯表面中间温度平均升高35℃左右,空冷区内中心温度明显增大,凝固终点后移2.25m左右.

According to practical production of 240 mm × 280 mm 0.45C steel billet in a certain factory, a mathematical model of solidification and heat transfer of square billet based on pinshooting and temperature measuring was established.The influences of casting speed, superheat and flow rate of secondary cooling on the continuous casting billet temperature and thickness of shell were analyzed.The results show that casting speed is the primary factor.W…查看全部>>

留津津;刘建华;吴华杰;包燕平;王国新;杜建新

北京科技大学冶金与生态工程学院,北京,100083北京科技大学冶金工程研究院,北京,100083北京科技大学冶金工程研究院,北京,100083北京科技大学冶金工程研究院,北京,100083北京科技大学冶金工程研究院,北京,100083北京科技大学冶金工程研究院,北京,100083

金属材料

45钢连铸大方坯凝固数值模拟

《铸造技术》 2011 (2)

259-261,3

评论

您当前未登录!去登录点击加载更多...