| 注册
首页|期刊导航|中国组织工程研究与临床康复|一种碳/碳复合材料表面制备高结合强度羟基磷灰石涂层的新方法

一种碳/碳复合材料表面制备高结合强度羟基磷灰石涂层的新方法

李冬梅 熊信柏 邹春莉 马楚凡

中国组织工程研究与临床康复2011,Vol.15Issue(3):441-444,4.
中国组织工程研究与临床康复2011,Vol.15Issue(3):441-444,4.DOI:10.3969/j.issn.1673-8225.2011.03.015

一种碳/碳复合材料表面制备高结合强度羟基磷灰石涂层的新方法

A novel method for preparing adherent hydroxyapatite coating on carbon/carbon composite surface

李冬梅 1熊信柏 2邹春莉 2马楚凡1

作者信息

  • 1. 解放军第四军医大学口腔医学院修复科,陕西省西安市,710032
  • 2. 深圳市特种功能材料重点实验室,广东省深圳市,518060
  • 折叠

摘要

Abstract

BACKGROUND:At present, there are many methods for preparing hydroxyapatite (HA) coating on carbon/carbon composite surface, but the bonding strength between the prepared coating and the substrate is not high.OBJECTIVE:To propose a novel method for preparing HA coating with high bonding strength on carbon/carbon composite surface.METHODS:Firstly, monetite coating was deposited on carbon/carbon composite using induction heating technique, and then the monetite coating was converted to HA by hydrothermal method in ammonia solution. The morphology of the coating was observed under scanning electron microscopy, the critical load of HA coating was determined using scratch test, and shear strength was detected with extrusion method.RESULTS AND CONCLUSION:Using induction heat deposition method, dense block anhydrous dicalcium phosphate coating with grain structure was prepared in the carbon/carbon composite surface, and then transformed into dense HA coating with good crystals by hydrothermal method. The critical load of HA coating is 13.31 N and shear strength is 47 MPa.

关键词

碳/碳复合材料/羟基磷灰石/高频感应加热沉积/水热反应/涂层

分类

医药卫生

引用本文复制引用

李冬梅,熊信柏,邹春莉,马楚凡..一种碳/碳复合材料表面制备高结合强度羟基磷灰石涂层的新方法[J].中国组织工程研究与临床康复,2011,15(3):441-444,4.

基金项目

陕西省科技计划项目(2008K14-03),国家自然科学基金资助(50702034),深圳市科技计划项目(PT200805200295A). (2008K14-03)

中国组织工程研究与临床康复

OACSCDCSTPCD

2095-4344

访问量0
|
下载量0
段落导航相关论文