表面技术2011，Vol.40Issue(1)：8-10,33,4.
激光熔覆SiC/Co复合涂层的组织与性能研究
Microstructure and Performance of Laser Cladding SiC/Co Coating
张维平 1郎志华 1马海波1
作者信息
- 1. 大连理工大学,材料科学与工程学院,大连,116024
- 折叠
摘要
Abstract
The SiC/Co composite coating was prepared on 45 steel substrate by laser cladding. The coating's microstructure, friction and wear properties were examined. The results show that the cladding layer is composed of γ-Co and Cr23C6. The bonding zone of the coating is branches crystal and the cladding layer is equiaxed crystal phase. Microhardness of the melting zone is between 1 300～1 500HK, which is 4 times higher than that of the substrate. The friction and wear properties of coating increases prominently compared with matrix.关键词
激光熔覆/SiC/Co复合涂层/显微组织/摩擦学性能Key words
laser cladding/ SiC/Co composite coating/ microstructure/ tribological property分类
矿业与冶金引用本文复制引用
张维平,郎志华,马海波..激光熔覆SiC/Co复合涂层的组织与性能研究[J].表面技术,2011,40(1):8-10,33,4.
