| 注册
首页|期刊导航|硅酸盐学报|溶胶-凝胶法制备SiO2/有机硅复合涂料

溶胶-凝胶法制备SiO2/有机硅复合涂料

朱再盛 涂伟萍 胡剑青

硅酸盐学报2011,Vol.39Issue(2):334-338,5.
硅酸盐学报2011,Vol.39Issue(2):334-338,5.

溶胶-凝胶法制备SiO2/有机硅复合涂料

Synthesis of SiO2/Organosilicone Hybrid Coating via Sol-Gel Method

朱再盛 1涂伟萍 2胡剑青1

作者信息

  • 1. 华南理工大学化学与化工学院,广州,510641
  • 2. 广东药学院药科学院,广州,510006
  • 折叠

摘要

Abstract

The transparent and hard SiO2/organosilicone hybrid coatings were prepared on polycarbonate (PC) with tetraethoxysilane (TEOS), methyltriethoxysilane, dimethyldiethoxysilane and 3-(methacryloxypropyl)-trimethoxysilane as the main raw materials by the sol-gel method. The structure and properties of the hybrid coating were characterized by Fourier transformed infrared, ultraviolet-visible spectroscopy, thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, atomic mechanics microscope,contact angle measuring instrument, and hardness tester etc. It is found that the basic structure of the hybrid coating is Si-O-Si.After heat-cured at 120 ℃, the thickness of the hybrid coating is 0.84μm by dipping-withdrawing manner. The hybrid coating is smooth, homogenous and densified, and can improve the transparency of PC (transmittance is increased by nearly 5%). The contact angle of the hybrid coating to the water increases with the increase of curing time. The contact angle is 93 after heat-cured at 120 ℃ for 3 h. The hybrid coating has excellent thermal stability, which increases gradually with the increase of TEOS content. When the mole ratio of R (organic groups) and Si in SiO2/organosilicone hybrid resin is 0.78, the adhesion strength of hybrid coating on PC sheet is 0 class (cross-cut tape test), and it reaches a pencil scratch hardness of 2H.

关键词

溶胶-凝胶法/硅树脂/复合/聚碳酸酯/硬质涂料

Key words

sol-gel method/ organosilicone/ hybrid/ polycarbonate/ hard coating

分类

化学化工

引用本文复制引用

朱再盛,涂伟萍,胡剑青..溶胶-凝胶法制备SiO2/有机硅复合涂料[J].硅酸盐学报,2011,39(2):334-338,5.

基金项目

国家自然科学基金(50903031)资助项目. (50903031)

硅酸盐学报

OA北大核心CSCDCSTPCD

0454-5648

访问量0
|
下载量0
段落导航相关论文