轻工机械2011，Vol.29Issue(1)：1-3,7,4.DOI:10.3969/j.issn.1005-2895.2011.01.001
注塑成型工艺参数对注塑件缩痕影响的研究
Influence of Injection Molding Processing Parameters on Sink Marks of Injection-piece
摘要
Abstract
Moldflow software was used to obtain the best gate location. Influence of injection molding processing parameters on sink marks of injection-piece was studied. The effects of different processing parameters were analyzed and better processing parameters were obtained. The results of research show that decreasing melt temperature, mold temperature and increasing injection time can effectively reduce the sink marks. [ Ch,6 fig. 3 tab. 8 ref. ]关键词
塑料工业/工艺参数/Moldflow软件/缩痕Key words
plastics industry/ processing parameters/ Moldflow software/ sink marks分类
化学化工引用本文复制引用
傅建钢,傅晓锦..注塑成型工艺参数对注塑件缩痕影响的研究[J].轻工机械,2011,29(1):1-3,7,4.基金项目
浙江省自然科学基金项目(Y106847) （Y106847）
(Y1090153) （Y1090153）
