爆破器材2011，Vol.40Issue(2)：11-13,3.
半正方形罩线型切割器的数值模拟研究
Numerical Simulation of Linear Cutter with Semi-square Liner
姚志华 1王志军 2付璐 1徐昊1
作者信息
- 1. 中北大学机电工程学院,山西太原,030051
- 2. 空军场务技术试验中心,山东济宁,272000
- 折叠
摘要
Abstract
A semi-square liner shaped charge cutter is a shape charge by changing charge structure based on two
cuneiform liners. The nonlinear finite element software LS-DYNA was applied to complete the numerical simulation on the
semi-square liner shaped charge cutter under explosion load. The result shows that the semi-square liner shaped charge
cutter can form jet. The jet so-formed contains an initial process of gathering the second jet, of which the velocity has
increased by 33％ or more than the first jet velocity. The jet velocity of linear cutter with semi-square liner is significantly
higher than that of the ordinary linear cutter, and the jet velocity formed will decrease with the increase of liner thickness.关键词
线型聚能装药/半正方形罩/射流/数值模拟Key words
liner shaped charge cutter/semi-square liner/ jet/ numerical simulation分类
军事科技引用本文复制引用
姚志华,王志军,付璐,徐昊..半正方形罩线型切割器的数值模拟研究[J].爆破器材,2011,40(2):11-13,3.
