光学精密工程2011，Vol.19Issue(4)：870-877,8.DOI:10.3788/OPE.20111904.0870
扫描平面激光坐标测量系统校准方法的优化
Optimization of calibration method for scanning planar laser coordinate measurement system
摘要
Abstract
On the basis of angle measurement by a rotating planar laser in the single station and intersection in the multi-station, a coordinate measuring system was introduced,and its calibration method was optimized. With analyzing its features of special angle measurement and multi-sensor intersection measurement, the principle of azimuth information measurement by the single station and the system structure were described,then the calibration methods for structure parameters of single station and system parameters were studied. According to the characteristics of a rotating shaft and a laser plane,structure parameters were calibrated by theodolites through designed corresponding accessories, and the system calibration was realized by determining the laser planes in the initial place by using a receiver. In order to perfect the calibration technology, the main error factors affecting the calibration accuracy were analyzed, the calibration methods of structure parameters and the process of system calibration were modified. An integrative calibration method for the system was proposed. Experiments show that the measuring accuracy of the system has reached 0. 1 mm, which proves the calibration method is feasible, and can improve the calibration accuracy.关键词
大尺寸测量/坐标测量/激光测量法/校准/误差分析Key words
large-scale measurement/ coordinate measurement / laser measuring method/ calibration/error analysis分类
机械制造引用本文复制引用
劳达宝,杨学友,邾继贵,叶声华..扫描平面激光坐标测量系统校准方法的优化[J].光学精密工程,2011,19(4):870-877,8.基金项目
国家自然科学资金重点资助项目(No.50735003) （No.50735003）
天津市自然科学基金资助项目(No.09JCZDJC26900) （No.09JCZDJC26900）
天津市科技支撑计划重点项目(No.08ZCGYGX11800) （No.08ZCGYGX11800）
