陕西科技大学学报（自然科学版）2011，Vol.29Issue(2)：66-68,77,4.
基于Moldflow摄像头支架热流道注塑成型模拟
MOLDING SIMULATION OF CAMERA HOLDER HOT RUNNER MOULD BASED ON MOLDFLOW
董学敏 1葛正浩 1张凯凯 1刘韦华1
作者信息
- 1. 陕西科技大学机电工程学院,陕西,西安,710021
- 折叠
摘要
Abstract
The casting system and cooling system of the camera holder mould was designed and determine based on Moldflow. The weld line, air traps and warping defects of the holder were simulated and analyzed. The defects can be reduced through optimizing injection parameters. Therefore the product quality can be predicted and optimized before the mould manufacturing, the cycle of mould manufacturing has been shorten, which has great practical guiding significance.关键词
Moldflow/摄像头支架/成型模拟/注塑/热流道Key words
Moldflow/ camera holder/ molding simulation/ injection molding/ hot runner分类
矿业与冶金引用本文复制引用
董学敏,葛正浩,张凯凯,刘韦华..基于Moldflow摄像头支架热流道注塑成型模拟[J].陕西科技大学学报（自然科学版）,2011,29(2):66-68,77,4.
