模具技术Issue(3)：39-41,59,4.
轮胎活络模具中套耐磨板的磨损研究
Wear research of cone ring wear-resistant plate of segmented tire mould
田仲可 1李晓宾 1张自浩 1胡海明1
作者信息
- 1. 青岛科技大学,机电工程学院,山东,青岛,266061
- 折叠
摘要
Abstract
The structure of inclined plane radial parting mould and its opening-closing process were introduced in this paper. The relationship between wear depth of cone ring wear-resistant plate and circumferential clearance of two adjacent segments was defined. By Deform-3D simulation, the Archard model's wear coefficient of cone ring wear-resistant plate of 1188 type under specified conditions was estimated. The wear model between cone ring wear-resistant plate and the bow bass was established. And based on the model, prediction and real time control of the generation of the tire rubber edge can be done, which results in the advancement of mold manufacture management and the improvement of tire quality.关键词
中套/耐磨板/磨损量/间隙/Deform-3D/磨损系数Key words
cone ring/ wear-resistant plate/ wear depth/ clearance/ Deform-3D/ wear coefficient分类
信息技术与安全科学引用本文复制引用
田仲可,李晓宾,张自浩,胡海明..轮胎活络模具中套耐磨板的磨损研究[J].模具技术,2011,(3):39-41,59,4.
