中国康复理论与实践2011，Vol.17Issue(4)：386-389,4.
小腿残肢负重压力取型系统的设计及应用
Design and Application of Weight-bearing Pressure Casting System for Transtibial Stump
魏晨婧 1曹学军 1宋佳佳 2王林2
作者信息
- 1. 首都医科大学康复医学院,北京市,100068
- 2. 中国康复研究中心康复工程研究所,北京市,100068
- 折叠
摘要
Abstract
Objective To design a weight-bearing pressure casting system for transtibial prostheses to make the total surface bearing socket and to control the stump and bearing during the casting process. Methods The weight-bearing pressure casting system was designed. 6 cases weared the socket by this method and traditional patellar tendon bearing socket by hand casting. Socket interface pressure was compared, and the effect of casting was assessed. Results Compared with patellar tendon bearing socket, the socket pressure in the socked by this method was distributed more equally throughout the transtibial residual limb during the casting process, and completed the stumps compression and stump-end pressure control. Conclusion Weight-bearing pressure casting system can make the total surface bearing socket, and improve the fit of the socket.关键词
小腿假肢/接受腔/全面承重/压力取型Key words
transtibial prostheses/ sockets total surface bearings pressure casting分类
医药卫生引用本文复制引用
魏晨婧,曹学军,宋佳佳,王林..小腿残肢负重压力取型系统的设计及应用[J].中国康复理论与实践,2011,17(4):386-389,4.
