高校化学工程学报2011，Vol.25Issue(2)：193-198,6.
疏水缔合聚丙烯酰胺溶解槽内流动特性的数值模拟
Numerical Simulation of Flowing Property in Hydrophobically Associating Polymer Dissolution Tank
谢明辉 1周国忠 2龙湘犁 2虞培清1
作者信息
- 1. 华东理工大学化学工程联合国家重点实验室,上海200237
- 2. 浙江长城减速机有限公司,浙江温州325028
- 折叠
摘要
Abstract
Dissolution process of hydrophobically associating polyacrylamide AP-P4 was divided into three mixing states (the start of AP-P4 just feeding, the end of swelling, the end of dissolution). The flow fields of the three states in the dissolution tank with Pitched blade XJD and the new hydrofoil impeller KCXU were numerically simulated respectively by using computational fluid danymics (CFD) method. The fluid velocities,circulation flow rates and shaft powers of the two impellers were investigated. The results show that, in three different states of AP-P4 dissolution process, the fluid velocities and the circulation flow rates in the stirred tank with KCXU are significantly greater than that in stirred tank with XJD, which indicates KCXU can increase the circulating rate. The deviations between the measured and the simulated shaft powers are within 16％. These results are of significance for the optimization of the industrial stirred tanks.关键词
混合状态/计算流体力学(CFD)/循环流量/搅拌器Key words
mixing state/ computational fluid danymics (CFD)/ circulation flow rate/ impeller分类
化学化工引用本文复制引用
谢明辉,周国忠,龙湘犁,虞培清..疏水缔合聚丙烯酰胺溶解槽内流动特性的数值模拟[J].高校化学工程学报,2011,25(2):193-198,6.
