铸造技术2011，Vol.32Issue(3)：297-299,3.
兆瓦级风力发电机主轴铸造工艺模拟
Simulation of Casting Process for MW Wind Generator Shaft
摘要
Abstract
The foundry process of MW wind generator shaft was designed by UG modeling and finite element software ProCAST.The filling and solidification and temperature field were simulated and the shrinkage defect distribution was predicted.The simulation results show that the casting process that filling from the bottom, the heat riser and the chills located to the bottom can ensure the directional solidification of casting, then a MW wind generator shaft produced by casting can meet the required performance.关键词
铸钢件/主轴/数值模拟/ProCAST分类
金属材料引用本文复制引用
陈德平,许健,杨刚,杨屹,张泽磊..兆瓦级风力发电机主轴铸造工艺模拟[J].铸造技术,2011,32(3):297-299,3.基金项目
四川省应用基础研究项目(2010JY0021) （2010JY0021）
