大连工业大学学报2011，Vol.30Issue(3)：157-160,4.
扇贝柱质构分析的测试条件
Optimization for texture prefile analysis of scallop adductor
摘要
Abstract
To optimize the Texture Profile Analysis (TPA) method for scallop adductor, the influence of the pretreatment condition and the compression degree and compression rate on TPA parameters including hardness, springiness, cohesiveness, chewiness and resilience were investigated. Results showed that the compression degree can significantly affect all the TPA parameters mentioned above but not the chewiness. Instead, the compression rate didn't have a significant influence on the TPA parameters. The optimum pretreatment condition was heating at 70 ℃ for 12 min, and the optimum compression degree and compression rate for TPA were 60 ％ and 1.0 mm/s respectively.关键词
扇贝柱/质构分析(TPA)/压缩程度/压缩速率Key words
scallop adductor/ texture profile analysis/ compression degree/ compression rate分类
轻工纺织引用本文复制引用
董秀萍,肖桂华,朱蓓薇,陈昭,陈雪娇..扇贝柱质构分析的测试条件[J].大连工业大学学报,2011,30(3):157-160,4.基金项目
国家"十一五"科技支撑计划项目(2008BAD94B03) （2008BAD94B03）
国家高技术研究发展计划(863计划)项目(2007AA091804). （863计划）
