三峡大学学报（自然科学版）2011，Vol.33Issue(2)：70-74,5.
基于FLUENT的插齿机主轴液压轴承静态特性研究
Research on Static Characteristics of Liquid Hydrostatic Bearing of Gear Shaping Machine Based on FLUENT
王磊 1田启华 1张云才 2杜义贤1
作者信息
- 1. 三峡大学机械与材料学院,湖北宜昌443002
- 2. 三峡大学电气与新能源学院,湖北宜昌443002
- 折叠
摘要
Abstract
Three-dimensional numerical simulation for flow field of hydraulic bearing of spindle of gear shaping machine is conducted by using FLUENT which is a computational fluid dynamics software that based on finite volume method. Bearing capacity, flow rate, oil film stiffness are then obtained. By analyzing the data,the results show the rule that structural parameters of bearing affect the static characteristics of hydraulic bearing. The result shows that when the spindle is static, with the increase of factor of eccentricity, the load capacity increases and the oil film stiffness decreases; when the spindle's rotating speed is low, the load capacity and the oil film stiffness increase with the increase of factor of eccentricity; under big factor of eccentricity and high rotating speed working conditions, the dynamic effect exists and can not be neglected. The results can provide a new calculation method and reference for hydrostatic bearing design and optimization.关键词
插齿机主轴/液压轴承/FLUENT/静态特性分类
机械制造引用本文复制引用
王磊,田启华,张云才,杜义贤..基于FLUENT的插齿机主轴液压轴承静态特性研究[J].三峡大学学报（自然科学版）,2011,33(2):70-74,5.
