| 注册
首页|期刊导航|电网技术|根据电缆表面温度推算导体温度的热路简化模型暂态误差分析

根据电缆表面温度推算导体温度的热路简化模型暂态误差分析

刘刚 雷成华 刘毅刚

电网技术2011,Vol.35Issue(4):212-217,6.
电网技术2011,Vol.35Issue(4):212-217,6.

根据电缆表面温度推算导体温度的热路简化模型暂态误差分析

Analysis on Transient Error of Simplified Thermal Circuit Model for Calculating Conductor Temperature by Cable Surface Temperature

刘刚 1雷成华 1刘毅刚2

作者信息

  • 1. 华南理工大学电力学院,广东省,广州市,510640
  • 2. 广东电网公司广州供电局,广东省,广州市,510310
  • 折叠

摘要

Abstract

The temperature of power cable conductor of being operated cable is the foundation to judge whether the cable reaches its rated current carrying capacity or not. To analyze the accuracy of cable conductor temperature calculated by simplified thermal circuit model, based on the thermal circuit model to calculate the temperatures of different layers of 110 kV XLPE cable and its simplified model, by means of Matlab software the cable surface temperature-based computation expression to calculate cable conductor temperature is derived, and the error between the cable conductor temperature calculated by complete thermal circuit model and that by its simplified model are computed theoretically, then the functional relation between the error and the current applied to the cable is given. Meanwhile, a transient temperature rise test of directly buried cable is designed.According to the measured data of cable surface temperature,the temperatures of conductors and insulating layers are calculated by the simplified model, then the comparative analysis on the errors between the temperatures of conductors and insulating layers calculated by the simplified model and the measured temperatures of conductors and insulating layers is performed. Analysis results show that the errors between the cable conductor temperatures calculated by simplified model and the measured cable conductor temperatures are inside the allowable range, thus in engineering application the simplified thermal circuit model can be used to calculate cable conductor temperature by surface temperature of the cable.

关键词

热路简化模型/表面温度/导体温度/误差分析/试验验证/电力电缆

Key words

simplified thermal circuit method/ surface temperature/ conductor temperature: error analysis/ experiment validation/ power cable

分类

信息技术与安全科学

引用本文复制引用

刘刚,雷成华,刘毅刚..根据电缆表面温度推算导体温度的热路简化模型暂态误差分析[J].电网技术,2011,35(4):212-217,6.

基金项目

国家重点基础研究发展计划项目(973计划)(2009CB724507). (973计划)

电网技术

OA北大核心CSCDCSTPCD

1000-3673

访问量0
|
下载量0
段落导航相关论文