表面技术2011，Vol.40Issue(2)：51-54,4.
乳液模板法制备硅基蜂窝状结构超疏水薄膜及薄膜表征
Preparation and Characterization of Silica-based Superhydrophobic Films with Beehive-like Structure by Emulsion Template Method
摘要
Abstract
Silica sol was added into the polystyrene(PS) emulsion and the films were prepared by dip-withdrawing method. After heat-treatment and modification with trimethylchlorosilane(TMCS) in ethanol, the as-prepared films showed superhydrophobicity. On the basis of the morphology of the films and the water contact angle(WCA), the effect of the amount of the monomer and the ratio of silica sol to PS emulsion on the hydrophobicity of the films was studied.In addition, the reason of the superhydrophobicity of the films was also analyzed. The results show that the emulsion template is removed during the heat treatment process, and the films gain a beehive-like structure which enhanced the hydrophobicity of the films.关键词
超疏水/乳液模板/蜂窝状结构/接触角Key words
superhydrophobicity/ emulsion template/ beehive-like structure/ contact angle分类
数理科学引用本文复制引用
李举豹,刘杉杉,陈玉清..乳液模板法制备硅基蜂窝状结构超疏水薄膜及薄膜表征[J].表面技术,2011,40(2):51-54,4.基金项目
山东省自然科学基金项目(Y2005F28) （Y2005F28）
