现代电子技术2011，Vol.34Issue(8)：17-19,22,4.
基于FPGA的电台接口转换模块设计
Design of Radio Interface Conversion Module Based on FPGA
王宇杰 1林明 1姜黎 2顾晶2
作者信息
- 1. 江苏科技大学,电子信息学院,江苏,镇江,212003
- 2. 中国电子集团,第28研究所,江苏,南京,212003
- 折叠
摘要
Abstract
Most of the available radio interface conversion modules use the analog circuits, which cause bad stability and complicated polytechnics. The digital signal processing technology is adopted in this paper to process the signal transmission,improve the signal transmission rate and system stability, reduce the transmission error rate, and save the channel resources.The FPGA is taken as the core chip in this subject to design and develop the module. The FFT experiment is simulated with DSP Builder. The interface conversion module is developed with QuartusII. The result shows that the module circuit system achieved by this method is stable and PTT signal is pure.关键词
FFT/FIR/Cordic算法/稳定处理Key words
FFT/ FIR/ Cordic arithmetic/ stable processing分类
信息技术与安全科学引用本文复制引用
王宇杰,林明,姜黎,顾晶..基于FPGA的电台接口转换模块设计[J].现代电子技术,2011,34(8):17-19,22,4.
