哈尔滨商业大学学报（自然科学版）2011，Vol.27Issue(2)：248-251,4.
颗粒增强铝基复合材料磨削加工研究
Research on grinding machining of particle reinforced aluminum matrix composites
李德溥1
作者信息
- 1. 哈尔滨商业大学轻工学院,哈尔滨,150028
- 折叠
摘要
Abstract
In this paper, the experimental study of grinding machining of plane,hole and slot of particle reinforced aluminum matrix composites with the electroplated diamond wheel was conducted.In the plane processing the machined surface appearance was analyzed in the using scanning electron microscope ( SEM ), the surface roughness in the grinding direction was measured using surface roughness tester, the cut off was 0.8 mm and the evaluation length was 5 mm.In the processing of hole and slot was measured hole diameter and slot width using tool microscope.The results showed that high quality processed surface was achieved by using grinding technology, under the experiment condition of this paper the surface roughness of machined plane was between Ra 0.285 μm and 0.82 μm, that the breakage of machined hole and slot in grinding machining can be effectively avoided.关键词
复合材料/平面磨削/孔槽磨削Key words
composite materials/ grinding/ hole grinding groove分类
机械制造引用本文复制引用
李德溥..颗粒增强铝基复合材料磨削加工研究[J].哈尔滨商业大学学报（自然科学版）,2011,27(2):248-251,4.
