西华大学学报（自然科学版）2011，Vol.30Issue(2)：17-20,4.
加工中心电主轴整机动力学有限元建模与实验研究
Dynamic Modeling for Motorized Spindle Whole-body of Machining Center Using FEM and Exoerimental Study
摘要
Abstract
In this paper the dynamic modeling of motorized spindle whole-body, which is equivalent to the shaft-bearing-motorbeating housing-system, is conducted using the finite element method and verified by physical experiments. The results indicate that the first three sets obtained by FEA coincide with those obtained by physical experiments approximately, the inaccuracy is subtle. However the deviation increases considerably when the analysis frequency is higher than 3 kHz. The finite element model founded in this paper, which is of significance in dynamic respond research and optimization design,is identified by physical experiment ,and is efficient for the prediction of lower set frequency.关键词
电主轴整机/动力学分析/有限元建模/物理模态实验Key words
motorized spindle whole-body/ dynamics analysis/ FEM/ physical modal experiment分类
机械制造引用本文复制引用
彭必,殷国富,姜华,胡腾,钟开英,郑裕来..加工中心电主轴整机动力学有限元建模与实验研究[J].西华大学学报（自然科学版）,2011,30(2):17-20,4.基金项目
2009年国家科技重大专项(2009ZX04001-013) （2009ZX04001-013）
