| 注册
首页|期刊导航|铸造|耐热炉排材质的抗氧化性能研究

耐热炉排材质的抗氧化性能研究

朱权利 陈家坚 李微 刘太权 汪桂龙

铸造2011,Vol.60Issue(6):579-582,4.
铸造2011,Vol.60Issue(6):579-582,4.

耐热炉排材质的抗氧化性能研究

Study on Oxidation Resistance of Heat-Resistant Grate

朱权利 1陈家坚 1李微 1刘太权 1汪桂龙2

作者信息

  • 1. 华南理工大学机械与汽车工程学院,广东,广州,510640
  • 2. 广东华金合金材料实业有限公司,广东,广州,510890
  • 折叠

摘要

Abstract

The oxidation kinetics at 960 ℃ of RTCr28Ni15 and RTCr18Ni4 used for grate in garbage incinerator were studied by weight gain method.The microstructure, cross section, composition and the oxidation resistance mechanism of these two alloys' oxidation films generated after heating at 960 ℃ for 100 h were analyzed by using of XRD, SEM and EDS.The results show that both the oxidation curves of RTCr28Ni15 and RTCr18Ni4 increase fast at the first stage and then slow down,but the oxidation rate of RTCr18Ni4 is faster than RTCr28Ni15.There is no protective oxidation film that forms on surface of RTCr18Ni4, so its oxidation resistance at 960 ℃ is weak.However RTCr28Ni15 is totally oxidation iesistant at 960 ℃ due to the protectiveoxidation film formed on its surface and its oxidation resistance is superior to RTCr18Ni4.

关键词

耐热钢/炉排/抗氧化性/垃圾焚烧炉

Key words

heat-resistant steel/ grate/ oxidation resistance/ garbage incinerator

分类

矿业与冶金

引用本文复制引用

朱权利,陈家坚,李微,刘太权,汪桂龙..耐热炉排材质的抗氧化性能研究[J].铸造,2011,60(6):579-582,4.

铸造

OA北大核心CSCDCSTPCD

1001-4977

访问量0
|
下载量0
段落导航相关论文