噪声与振动控制2011，Vol.31Issue(3)：174-178,5.DOI:10.3969/j.issn.1006-1355-2011.03.041
体积位移传感器的研讨
Research on Volume Displacement Sensor
摘要
Abstract
With the example of vibrating beam of difference boundary conditions, a new method is presented for design of volume displacement sensors using shaped PVDF film on the basis of the approach of integration by parts.The PVDF sensor's shape is independent of property of the excitation (the type, position and frequency, etc.).Furthermore, the design method proposed here does not require the information of the structural mode shapes of the structures.The boundary conditions of vibrating beam can be divided into two groups: (1) one end is clamped and the other is arbitrary; (2) both ends are pin-connected.For each group of boundary condition, the volume displacement of the beam can be measured using a certain shape of PVDF sensors.关键词
振动与波/体积位移/压电式传感器/分部积分Key words
vibration and wave/ volume displacement/ piezoelectric sensors/ integral by parts分类
通用工业技术引用本文复制引用
毛崎波..体积位移传感器的研讨[J].噪声与振动控制,2011,31(3):174-178,5.基金项目
江苏省汽车工程重点实验室开放基金资助(基金编号:KJS01088) （基金编号:KJS01088）
