可再生能源2011，Vol.29Issue(3)：132-136,5.
基于复合形法的垂直轴风力机翼型优化设计
Optimal design on airfoil of vertical axis wind turbine based on complex optimum method
曲建俊 1梅毅 1许明伟1
作者信息
- 1. 哈尔滨工业大学机电工程学院,黑龙江哈尔滨150001
- 折叠
摘要
Abstract
With regard to the fact that low speed aviation airfoils are not fully suitable for vertical axis wind turbines,the complex optimum method was used in this paper to optimize the NACA0015 airfoil, which is widely applied in small-scale vertical axis wind turbine. The value of airfoil camber and its thickness were chosen as design variables,and the weighted value of the tangential coefficient and the stall angle were selected as objective function. By applying the approach of combining XFOIL program and Viterma-Corrignan post-stall mode ,the performance of airfoil was calculated. The result illustrates that,by comparison with the airfoil of NACA0015, the lift coefficient, the stall angle and the tangential coefficient of the new designed airfoil were increased by 33.5％,3° and 43.5％, respectively.关键词
垂直轴风力机/优化设计/复合形法/翼型Key words
vertical axis wind turbine/ optimization/ complex optimum method/ airfoil分类
能源科技引用本文复制引用
曲建俊,梅毅,许明伟..基于复合形法的垂直轴风力机翼型优化设计[J].可再生能源,2011,29(3):132-136,5.
