辽宁工程技术大学学报（自然科学版）2011，Vol.30Issue(z1)：185-187,3.
CAD下等高线自动接边的实现
Realization of contour lines' automatic edge match in CAD environment
于皓 1高嵩 2王崇倡1
作者信息
- 1. 辽宁工程技术大学测绘与地理科学学院,辽宁阜新123000
- 2. 沈阳国源科技发展有限公司,辽宁沈阳110032
- 折叠
摘要
Abstract
To deal with automatic edge match of contour lines, a complex connection method was put forward in CAD environment, namely a method that connects endpoint trend and shortest distance.After multi-selection based on buffer region of square frame, trend comparison and distance judgement, then the contour lines that meet the requirements were joined.Those technological schemes have been experimented by means of ARX programme in CAD environment.Results indicate that the complex connection method which is fast and accurate is practicable.关键词
等高线/ARX/复合连接Key words
contour line/ ARX/ complex connection分类
天文与地球科学引用本文复制引用
于皓,高嵩,王崇倡..CAD下等高线自动接边的实现[J].辽宁工程技术大学学报（自然科学版）,2011,30(z1):185-187,3.
