人工晶体学报2011，Vol.40Issue(3)：752-757,6.
Y-Ce-ZrO2-TiC-A12O3复合陶瓷材料的制备及其摩擦磨损特性研究
Study on Preparation and Tribological Properties of Y-Ce-ZrO2-TiC-Al203 Composite Ceramic Material
摘要
Abstract
In order to improve the mechanical properties, Y-Ce-ZrO2-TiC-Al2O3 composite ceramic material stabilized with the mixture of rare earth oxides was prepared by vacuum hot pressing technique. Friction and wear properties of the ZrO2 based composite ceramic material were investigated. Morphologies of the worn surfaces were observed by SEM and phase analysis was carried out by XRD. Wear mechanisms of the composite ceramic material were analyzed comparing with that of single phase ZrO2 ceramic. The results indicated that the developed composite ceramic material has higher mechanical properties. Under the normal load of 140 N and the rotational speed of 200 r/min, the coefficient of friction and wear rate of Y-Ce-ZrO2-TiC-Al2O3 composite ceramic material were 0.65 and 2.88 × 10-7 mm3/N · m, respectively, which were obviously lower than that of single-phase ZrO2 ceramic. Wear mechanisms of the composite ceramic material were mechanically cold welding and adhesive wear.关键词
复合陶瓷/ZrO2/摩擦磨损/磨损机理Key words
composite ceramic/ zirconia/ friction and wear/ wear mechanism分类
化学化工引用本文复制引用
许崇海,张永莲,吴光永,赵诗奎,方斌..Y-Ce-ZrO2-TiC-A12O3复合陶瓷材料的制备及其摩擦磨损特性研究[J].人工晶体学报,2011,40(3):752-757,6.基金项目
教育部新世纪优秀人才支持计划(NCET-10-0866) （NCET-10-0866）
山东省自然科学杰出青年基金(JQ201014) （JQ201014）
国家自然科学基金(51075248) （51075248）
山东省自然科学基金(ZR2009FZ005)资助项目 （ZR2009FZ005）
