信息与电子工程2011，Vol.9Issue(3)：299-302,312,5.
0.14THz折叠波导行波管慢波结构设计与加T
Design and manufacture of 0.14 THz folded waveguide traveling wave tube slow wave structure
摘要
Abstract
This study applied an explicit method to the fast structural design of the slow wave circuit in a 0.14 THz folded waveguide traveling wave tuhe. To valid the primary design, cold-circuit properties. such as dispersion and interaction impedance. were calculated by using both theoretical method and electromagnetic software(CST MWS) simulation. Simulation results showed that. the dispersion curve was almost flat around 0.14 THz, and the interaction impedance was about 1 Ω. In order to satisfy high output power demand. some changes were made. Interactive simulation hy CST Particle Studio was found that modified structure could achieve more than 1 W output power around 0.14 THz. Micro Electrical Discharge Machining(EDM) and Micro milling were used for manufacturing a couple of period of the structure, respectively. It is found that both methods could satisfy the size accuracy, however. micro milling could obtain flatter surface and hetter surface roughness at the bottom.关键词
折叠波导/行波管/慢波结构/微铣削/微电火花Key words
folded waveguide/ traveling wave tuhes/ slow wave structure/ micro milling/ micro EDM分类
信息技术与安全科学引用本文复制引用
陈樟,王亚军..0.14THz折叠波导行波管慢波结构设计与加T[J].信息与电子工程,2011,9(3):299-302,312,5.基金项目
中国工程物理研究院909科技专项资助项日(9090502-2) （9090502-2）
