粉末冶金技术2009，Vol.27Issue(5)：346-350,5.
制备Y_2O_3弥散铁素体合金粉末方法的研究
A study on preparation of Y_2O_3 dispersion strengthened ferritic alloy powder
摘要
Abstract
In order to develop ODS ferrous alloys as a kind of backup materials of fusion nuclear reaction structure, Fe-Cr-Ti-W-V alloy powders were prepared by nitrogen atomization. The sol-gel, chemical soaking and precipitation method have been investigated and used to add Y_2O_3 particles to Fe-Cr-Ti-W-V alloy powder. The morphology, particle-size and distribution of Y_2O_3 were analyzed. The results show that above three methods can all successfully realize the mixture of Y_2O_3 particles and alloy powder, sol-gel method is a effective way to prepare nano scaled oxide powder with homogeneous distribution, the particles of smaller than 50 nm is about half of total, the average roundness is about 1.25.关键词
溶胶-凝胶法/沉淀法/化学浸润法/弥散相Key words
sol-gel method/ method of precipitation/ chemical soaking/ dispersoid分类
矿业与冶金引用本文复制引用
郭丽娜,贾成厂,胡本芙,田高峰..制备Y_2O_3弥散铁素体合金粉末方法的研究[J].粉末冶金技术,2009,27(5):346-350,5.基金项目
国家973计划资助项目(11163060) （11163060）
