计量学报2009，Vol.30Issue(z1)：128-131,4.DOI:10.3969/j.issn.1000-1158.2009.z1.033
齿轮测量中心的校准方法探究
Study on the Calibration Methods of Gear Measuring Center
杨国梁 1薛梓 1刘春杰 2王鹤岩1
作者信息
- 1. 中国计量科学研究院,北京,100013
- 2. 中技国际招标公司,北京,100055
- 折叠
摘要
Abstract
Gear measuring instrument is developed from the technology of the mechanical rolling-path to coordinate measuring method controlled by CNC. The mechanical structure and measuring principle are discussed through reviewing the development process of the gear measuring instruments, and the sources of the geometry error are analyzed. Finally, three simple and practical calibration methods are put forward.关键词
计量学/齿轮测量中心/校准精度/误差补偿Key words
Metrology/ Gear measuring center/ Calibration accuracy/ Error compensation分类
通用工业技术引用本文复制引用
杨国梁,薛梓,刘春杰,王鹤岩..齿轮测量中心的校准方法探究[J].计量学报,2009,30(z1):128-131,4.
