包裹法控制高吸水树脂初期吸水速率的研究OACSCD
Study on Wrapping Methods of Control Initial Water-Absorbent Rate of Super Absorbent Resin
针对高吸水树脂颗粒作为调剖堵水材料膨胀速度过快的缺点,为控制其初期吸水速率,用两种包裹材料(PKA、PBG)以及二者复合包裹材料(PAMG)对吸水树脂进行处理,探讨了各种因素和条件对吸水树脂初期吸水速率的影响.结果表明,PKA包裹剂质量分数为3%,在85℃下加入质量分数2%的非溶剂包裹3次,包裹后的吸水树脂在12 h内的吸水速率和没有采取包裹处理的相比下降了1.7倍,缓膨可达2天;PBG包裹剂质量分数为2%,在80℃下包裹3次,加入凝胶剂,形成的…查看全部>>
Be aimed at disadvantage of super-absorbent resin particles expanded too fast as a profile control material of water shut off, in order to control its initial water-absorbent rate, two wrapping materials (PKA,PBG) and their composits (PAMG) were used to deal with super-absorbent resin, discussed the influence of a variety of factors and conditions on the initial water-absorbent rate of super absorbent resin. The results showed that, when the mass concentrati…查看全部>>
邓又俊;周明
西南石油大学材料科学与工程学院西南石油大学材料科学与工程学院
能源科技
高吸水树脂包裹初期吸水速率
super absorbent resinwrapinitial water-absorbent rate
《石油与天然气化工》 2009 (5)
422-425,4
西南石油大学中青年骨干教师资助和西南石油大学校级青年科技基金资助(2007xjz034).
评论