中国机械工程2009，Vol.20Issue(21)：2541-2544,4.
潮流能水轮机叶片实验原型快速制造方法研究
Rapid Manufacture Method for Tidal Stream Turbine Blade Testing Model
摘要
Abstract
A rapid manufacture method for blade of tidal stream turbine which is the energy capture device in exploitation of tidal stream energy was put forward using CAD, reverse technology and rapid prototyping technology. Testing models were manufactured using this method. Results show that models manufactured by RP technology can meet the requirements of hydrodynamics testing both on structure strength and precision, compared with the casting turbine models. And the models with different vane shapes manufactured by RP technology can be optimized by model testing.关键词
快速成形/激光选区烧结/实验模型/潮流能水轮机Key words
rapid prototyping(RP)/ selective laser sintering(SLS)/ testing model/ tidal turbine分类
能源科技引用本文复制引用
李冬,王树杰,王超..潮流能水轮机叶片实验原型快速制造方法研究[J].中国机械工程,2009,20(21):2541-2544,4.基金项目
国家863高技术研究发展计划资助项目(2006AA052428) （2006AA052428）
山东省自然科学基金资助项目(Q2008F05) （Q2008F05）
国家大学生创新性实验计划资助项目(2007SR31) （2007SR31）
