机械制造与自动化Issue(3)：34-35,104,3.
航空铝7050高速铣削表面粗糙度试验研究
Experimental Research on Surface Roughness of 7050 Alloy Under High Speed Milling
杨济森 1郭宏伟 1李洪涛1
作者信息
- 1. 沈阳机床(集团)有限责任公司设计研究院,辽宁沈阳,110141
- 折叠
摘要
Abstract
In order to investigate main milling parameters which affect the surface roughness of 7050 alloy when the milling speed is more than 3 000 m per minute,this paper designs a milling experiment and by analyzing the experimental data.it reveals the variation relationship of the surface roughness between the periodic feed rate and the milling speed. In the end.it sums up the primary effect factor of the surface roughness of 7050 alloy and the milling parameters by using the milling to substitute the grinding.关键词
表面粗糙度/高速铣削/试验研究Key words
surface roughness/ high speed milling/ experimental research分类
机械制造引用本文复制引用
杨济森,郭宏伟,李洪涛..航空铝7050高速铣削表面粗糙度试验研究[J].机械制造与自动化,2011,(3):34-35,104,3.
