机械科学与技术2011，Vol.30Issue(7)：1116-1119,4.
基于SolidWorks Motion的CST动力学仿真研究
Dynamic Simulation of a Controlled Starting Transmission by SolidWorks Motion
摘要
Abstract
For a controlled starting transmission（CST）,a three-deminsion model,including a motor,epicyclic gear train,clutch and load,was set up.Simulation functions of the motor and hydroviscous variable speed clutch were deduced.A CST system dynamic simulation method was studied with SolidWorks Motion.With the method,the three stages of the CST starting up,running and shutting down were simulated.As a result the relationship between torque and load was found.At the same time the rules of power and heat generation in CST starting stage were revealed.关键词
可控启动传动装置/SolidWorks/Motion/动力学仿真/交流异步电机/电机特性/周转轮系/软启动Key words
controlled starting transmission/SolidWorks Motion/dynamic simulation/AC asynchronic motor/characteristic of motor/epicyclic gear trains/soft starting分类
机械制造引用本文复制引用
同志学,史丽晨,郭瑞峰..基于SolidWorks Motion的CST动力学仿真研究[J].机械科学与技术,2011,30(7):1116-1119,4.基金项目
西安工业应用发展研究项目（YF07028）资助 （）
