无机材料学报2011，Vol.26Issue(6)：638-642,5.DOI:10.3724/SP.J.1077.2011.00638
石墨粒度对纸基摩擦材料摩擦磨损性能的影响
Effect of Graphite Particle Size on Friction and Wear Performance of Paper-based Friction Material
摘要
Abstract
Paper-based friction materials containing four different graphite particle sizes were prepared using the wet paper-making process. The effects of graphite particle size on friction performance such as friction torque curves, dynamic friction coefficient, static friction coefficient and wear rate were studied by using an inertia friction tester. Meanwhile, the sensitivity of friction coefficient to braking pressure and rotating speed was also investigated. Worn surfaces of samples were analyzed by using scanning electron microscope. The results show that with graphite particle size decreasing, braking time increases and torque curves become more stable, while friction coefficient and wear rate decrease. The dynamic friction coefficient declines as braking pressure and rotating speed increase. Samples with proper particle size exhibit more stable friction coefficient in the continuous braking process. Lubricating film is formed to lower wear rate in the wom surface as the graphite particles size decreases.关键词
纸基摩擦材料/石墨粒度/摩擦磨损性能Key words
paper-based friction material/ graphite particle size/ friction and wear performance分类
通用工业技术引用本文复制引用
张翔,李克智,李贺军,付业伟,费杰,李海亮..石墨粒度对纸基摩擦材料摩擦磨损性能的影响[J].无机材料学报,2011,26(6):638-642,5.基金项目
凝固技术国家重点实验室(西北工业大学)博士后基金(08-BZ-2010) （西北工业大学）
陕西省重大科技创新项目(2008ZKC04-07) （2008ZKC04-07）
