| 注册
首页|期刊导航|航空材料学报|复合材料Z-pin的压缩试验研究

复合材料Z-pin的压缩试验研究

王晓旭 陈利

航空材料学报2011,Vol.31Issue(4):90-95,6.
航空材料学报2011,Vol.31Issue(4):90-95,6.DOI:10.3969/j.issn.1005-5053.2011.4.017

复合材料Z-pin的压缩试验研究

Experimental Studies on Compressive Properties of Composite Z-pins

王晓旭 1陈利1

作者信息

  • 1. 天津工业大学复合材料研究所教育部先进纺织复合材料重点实验室,天津300160
  • 折叠

摘要

Abstract

The axial compressive behavior of three kinds of composite Z-pins was investigated. The ultimate compressive stress and failure modes of composite Z-pins with different length were analyzed. The results show that carbon fiber Z-pins with the diameter of 0.50mm have the best compressive properties. Those with the diameter of 0. 28mm are apt to be buckled. And aramid fiber Z-pins are easily failures on the contact point. Theoretical predictions of critical stress of carbon fiber Z-pins agree well with the experimental results , but the experimental value of the critical stress value of aramid fiber Z-pins is lower than the theoretical value.

关键词

Z-pin/复合材料/压缩试验/临界应力

Key words

Z-pins/ composite materials/ compression experiment/ critical stress

引用本文复制引用

王晓旭,陈利..复合材料Z-pin的压缩试验研究[J].航空材料学报,2011,31(4):90-95,6.

基金项目

国家自然科学基金项目(11072175) (11072175)

航空材料学报

OA北大核心CSCDCSTPCD

1005-5053

访问量0
|
下载量0
段落导航相关论文