重型机械Issue(4)：122-126,5.
冷轧管机配重优化设计
Counterweight optimization design of cold pilger mill
李为 1牟相林 2董相连 3凡明 1李小荣 1曹世奇1
作者信息
- 1. 中国重型机械研究院有限公司,陕西西安710032
- 2. 宝钢工程设备部,上海200940
- 3. 浙江久立特材科技股份有限公司,浙江湖州313008
- 折叠
摘要
Abstract
At present, the mill saddle frequency and feed rates of large-scale cold Pilger mill have been increased. Therefore, the optimum design of balance weight for Pilger mill is extremely important to reduce the additional dynamic load and shake which are created by inertial force. The LG-220 type cold Pilger mill provided for a steel factory by China National Heavy Machinery Research Institute is analyzed by the Solidworks software. This article proposes optimization for balance weight scheme and calculation on balance quality. This scheme and method not only meets the use of cold Pilger mill, but also reduces the cost of equipment and e-quipment infrastructure.关键词
冷轧管机/惯性力/惯性力矩/平衡重Key words
cold Pilger mill/inertial force/inertia moment/balance weight分类
矿业与冶金引用本文复制引用
李为,牟相林,董相连,凡明,李小荣,曹世奇..冷轧管机配重优化设计[J].重型机械,2011,(4):122-126,5.
