铸造2011，Vol.60Issue(8)：727-730,4.
高碳低合金铸造耐磨钢的组织和性能研究
Microstructure and Properties of High Carbon Low Alloy Wear Resistant Cast Steel
摘要
Abstract
The influence of the heat treatment on microstructure and properties of the high carbon low alloy steel commonly used at home and abroad was studied, and the mechanism was discussed. The experiment results show that this steel has good hardenability. After air-blast quenching at 870 ℃ for 2 h and tempering at 550 ℃ for 2 h, the microstructure of the steel is consisted of tempered martensite, troostite and carbides, and the hardness of steel was HB 477, the impact toughness was 73 J/cm2. This steel is especially suitable for work conditions subjected to heavy impact abrasion because of its good comprehensive mechanical properties.关键词
高碳低合金钢/热处理工艺/组织/力学性能Key words
high carbon low alloy steel/heat treatment process/microstructure/mechanical properties分类
矿业与冶金引用本文复制引用
刘自勇,杨涤心,谢敬佩,王爱琴,王文焱..高碳低合金铸造耐磨钢的组织和性能研究[J].铸造,2011,60(8):727-730,4.基金项目
河南省国际科技合作项目(084300510006) （084300510006）
河南科技大学博士科研基金(2008bs025). （2008bs025）
